The Open Door Web Site
Two Transistor Reflex Radio

1

 

  Transistors: BC109C
  L1/L2 are the antenna coils
  If you can't find a 1mH coil (often called a "choke") you can make one by simply winding about 1 metre of thin wire around a piece of match-stick (or something similar).
N.B. Solder the resistors first, then the capacitors, then the coil, then finally, the diode and transistors. This reduces the risk of damage to transistors and diode through overheating.
Printed Circuit Board : Copper side (magnified)

Printed Circuit Board : Component side (magnified)

Long Wave Antenna Connections

Top of the Page

Homepage

Technology Homepage

Electronics Homepage

>Electronics

Backstage Pass to the Internet

Listings, Recognitions and Awards

EABJM Teachers' Resource Centre

EABJM Public Web Site

This Site was last
updated on 16/09/07
© The Open Door Team
Any questions or problems regarding this site should be addressed to
the webmaster

© David Hoult 2004